1/3MasterSeal #10 TIZIP®
The TIZIP® MasterSeal #10 watertight zipper is the high-performance solution for anyone who needs maximum protection against water, air, pressure and the elements. Designed and made in Germany to the highest quality standards, this airtight zipper combines outstanding mechanical strength with a lightweight, flexible design.
Thanks to its new advanced hydrolysis-resistant TPU coating, it offers a clear advantage in service life and durability over conventional products, performing better in water sports and fishing, where it is constantly exposed to moisture.
This robustness is matched by high design flexibility: the MasterSeal #10 is available in several construction configurations and customization options, to meet the specific needs of every application.
Technical features
- Watertightness: up to 1.0 bar (14.5 PSI)
- Transverse tensile strength: 200 N/cm
- Temperature resistance: from -30°C to +70°C
- Anti-hydrolysis coating: advanced TPU for a longer service life, even in constantly humid environments
- REACH compliant and PFAS free: maximum attention to sustainability and safety
Fields of application
- Technical clothing: diving suits, protective suits, fishing waders, motorcycle jackets and trousers
- Outdoor: backpacks, duffel bags, soft coolers, hunting rifle cases, tents, opening roofs
- Industrial: flexible storage of liquids, food and seeds, containment isolators
- Medical: isolation tents, hyperbaric chambers
Sizes
Guides
Interested in this product?
Talk to our team for B2B information, availability and quotes.
Frequently asked questions
What slit width is needed to install the MasterSeal #10?
- For all installation methods a slit width of 30 mm is recommended.
- Please ensure a minimum slit width of 20 mm.
- For installation into heavy or stiff material (for example neoprene sheets) a slit width of 30 mm on both front and back is highly recommended.
How do you maintain the MasterSeal #10 zipper?
- The docking end must be lubricated from time to time, for example before and after extended storage or use: periodic lubrication is crucial to the performance of the zipper.
- Please clean the zipper before lubricating it, using a fine brush, a mild detergent and water.
- Do not use solvents or aggressive detergents, as doing so may compromise zipper functionality.
- Debris caught between the teeth or coils affects functionality and limits sealing performance.
- Carefully apply lubricant to both front and back of the docking end surfaces, never to the zipper chain.
How should TIZIP® zippers be stored?
- Please use the originally supplied TIZIP® lubricant or a comparable product: excessive lubricant may stain fabric.
- Store the zippers properly lubricated and with the slider completely docked and closed.
- Take care not to bend zippers for storage purposes: storage in a bent or opened position for long periods may cause deformation, and deformation can limit sealing performance.
- Keep the zippers clean and dry, avoiding excessively hot and humid environments.
- Follow the FIFO method, using the zippers in the same order in which they were purchased.
How should the zipper be operated to avoid damage?
- Operate the slider slowly when opening and closing: pulling at the wrong angle may damage the zipper and limit its performance.
- Avoid over-pulling, forcing the two sides of the zipper apart: this may damage the slider or the bottom stop.
- Bending or crushing the zipper may cause damage and reduce waterproof performance.
- The slider must be completely closed and docked: if it is not, water will leak in.
